Defoamers for Coatings and Paints
In the coatings industry, foams are often a problem. They can cause surface coating defects and create appearance issues.
Yuanwang Company specially designed the defoamers for coatings. It offers an effective solution to control these problems. Our deformers for coatings and paints are compatible with many systems. They can give you defect-free coatings.
China Defoamer for Paints and Coatings
As a leading chemical additives company in China, Yuanwang has been in the coating, chemical, and building materials industry for more than 10 years.
Our company’s mission is to be a different company. We are committed to long-term partnerships. We will, always focus on solving your problems.
Yuanwang Company is a state-owned enterprise capitalized by the local government. The main business area is chemical additives, such as antifoams and defoamers.
Hot Selling Paint Defoamer
Yuanwang defoamers for coatings and paints are designed to solve the problems of foaming and surface defects in coatings. With decades in the chemical industry, we have developed these core products.
| Type | Characteristic |
| YW701 | Good dispersion & compatibility → Free Sample |
| YW702 | Cost-effective, can be used diluted → Free Sample |
| YW801P | Outstanding defoaming and anti-foaming performance, good stability → Free Sample |
3 Key Functions of Defoamers for Coatings and Paints
Controlling FoamDefoamers for coatings and paints destroy air bubbles. It can spread rapidly to the paint’s surface and flow to the edge. This reduces surface tension and controls bubble formation and foam.
Waterborne (WB) and Solvent-Borne (SB) CompatibilityOur defoamers for coatings and paints is compatible with both waterborne & solvent-borne coatings systems.
Optimized AppearanceAfter removing air bubbles, the coating will be smoother. It significantly enhances gloss and smoothness. It also prevents coating pits and peeling. It ensures paint flow and improves quality.
3 Tips for You to Choose the Right Defoamer for Paints and Coatings
Uderstand the composition of the coating itself
Check if the coating contains foam stabilizers, like dispersants and thickeners. These additives make it hard to eliminate the foam.
In this case, we usually choose a silicone antifoam agent. It quickly penetrates the foaming system, destabilizes, and defoams the foam. We need not worry about the paint evaporating and defoaming too slowly.
Understand the performance of the coating defoamer
Some defoamers are strong at either defoaming or inhibiting foam. Their abilities are not the same.
When grinding, add a good anti-foaming agent, like a polyether one.
When painting, add a good foam-breaking agent, like a silicone one.
A small amount of trial
First a small trial, then a medium trial, to find the best additive amount. The purpose of the small trial is to see whether the defoamer is suitable for your own foam problem;
The middle trial is to see the dosage and add an amount to avoid wasting raw materials.
Waterborne vs. Solvent-borne
Industrial coatings include waterborne and solvent-borne. It’s important to choose the right defoamer for each type.
– For water-based coatings, Yuanwang suggests that defoamers should be used both during production and application.
– For solvent-based coatings, defoamers are mainly used to inhibit foaming during the application process.
Yuanwang’s defoamers are compatible with both waterborne and solvent-borne coatings.
Why Choose Yuanwang
State-owned enterprise with a robust capital chain, ensuring strong reliability.- Engineers customize formulas precisely to help you solve problems more efficiently.
- Free sample trials are available until you are fully satisfied
- High repurchase rate from loyal customers.
Defoamers for Coatings and Paints
Frequently Asked Questions
We frequently encounter the issue of coating blistering, where round bubbles of different sizes appear on the surface after the paint film has dried.
Commonly, 7 factors cause the blistering of coatings:
1. Inadequate substrate treatment. When the residual substances volatilize naturally, it leads to blistering.
2. Reapplying the top coat when the primer film is not completely dry.
3. The combination of the substrate and the holes is not filled, there are gaps and holes, etc.
4. The paint’s viscosity is too high, and the ratio of the paint is not appropriate.
5. Dragging the brush back and forth when brushing, the air bubbles are not eliminated.
6. There is moisture in the compressor or air pipe, or there is moisture splashing on the construction surface
7. Air is mixed into the paint when it is ground or mixed.
When using defoamers for coatings and paints, it is important to consider 2 factors – the specific conditions of the foaming system & the appropriate amount of defoamer that should be used. Adding too much will not improve the defoaming effect but may lead to the following issues:
1. Too much dosage, resulting in high-cost expenditure
2. It may cause the paint to appear to shrink when painting. It also affects the paint’s performance.
3. Adding too much defoamers for coatings will not affect the defoaming effect, but the concentration of the paint is diluted with it.
4. Adding too much silicone-containing paint defoamer also affects the re-coating properties.
1. First of all, choose a good product.
Even if you accidentally add too much, it will not lead to too big a problem.
2. Carefully read the instructions.
It is recommended that the amount of how much. If you are not very clear, you can consult our professional engineers.
3. It is important to note that most defoamers for coatings and paint should not be directly added to diluted water-based coatings.
They should generally be introduced when the resin or coating viscosity is high. For best results, the defoamer should be added in two stages: once during the grinding process and again when the paint is being mixed, with roughly half of the total amount added at each stage.
In paint production, defoamers for coatings and paints offer numerous benefits.
1. Defoamers Improve the Quality and Appearance of Paints
Using defoamers for coatings and paints stops bubbles from forming. It makes the paint film smoother and more even. This enhances the texture and visual appeal of the paint.
2. Defoamers Enhance Paint Performance and Durability
Defoamers reduce bubbles in paint. This makes the film denser. It increases durability and waterproofing, extending the paint’s lifespan.
3. Defoamers Improve the Application Performance of Paints
Defoamers for coatings and paints effectively lower the viscosity of the paint, improving its rheological properties. This makes the paint easier to apply and coat, thereby increasing work efficiency.
4. Defoamers Reduce Energy Consumption and Costs in Paint Production
Defoamers help lower paint use and cut costs. They do this by minimizing bubbles and reducing energy use during mixing.
1. Air is mixed in when the pigments are milled or mixed.
2. Inclusion of gas during packaging
3. Air is mixed in during spraying during application.
These physical and chemical environments cannot be changed and foam cannot be avoided. Therefore, adding a paint foam inhibitor is the best choice.
Contact Us